123
Request a Quote Contact Harper Warranty SDS Sheet

Ceram Clean II™ 

ANILOX COATING & ADHESIVE CLEANER

Ceram Clean ll™ is our best-selling, innovative cleaner that is specially formulated to effectively and efficiently remove dried water-based, UV, and solvent-based inks from the cells in your anilox without damaging the cell structure on ceramic, chrome, or gravure anilox rolls.

Ceram Clean ll™ is available in three consistencies to meet the needs of your application; Original, Paste, and Pourable. The Original has the highest viscosity while the Pourable version has the lowest viscosity. All varieties are ready to use and have identical cleaning power!

Price range: $60.00 through $660.00

FOR 55 GALLON ORIGINAL, PASTE OR POURABLE, CONTACT HARPER FOR A QUOTE.

Request a Quote or Consultation

How long will one bottle last?

Of course the amount of cleaner will vary depending on the size of the anilox roll and how dirty it is.  On average though, one 16 ounce bottle of CeramClean II™ will clean 32 – (2.5”x 16.5”) rolls or 16 – (5”x 33”) rolls.

Can you use CeramClean II™ on press?

Yes, it can be used on press for quick cleanups where the anilox rolls are accessible.  CeramClean II™ should be used every time the roll is removed from the press.

Do I need it if I have an Ultra Sonic cleaner or other cleaning machine?

We like to compare CeramClean II™ to the stain remover in your laundry room.  When your regular detergent/cleaner or washing machine/Ultra Sonic Tank won’t get the stain out CeramClean II™ will.  Most people use it as their primary cleaner but it is a great compliment to an Ultrasonic tank or other cleaning machines.

Do I need to use a brush?

It is recommended because it aids in the spreading of the cleaner much better than a rag.  Brushes push the cleaner into the cells, removing the ink more efficiently.

FEATURES + BENEFITS
  • Effectively and efficiently remove dried water-based, UV, and solvent-based inks
  • Available in 3 consistencies: Original, Paste, and Pourable
  • Great if used in combination with cleaning scrubbers
INSTRUCTIONS
  1. Dampen a rag/cloth with water for UV or water-based inks. Use solvent for solvent based inks.
  2. Apply Ceram Clean II to dampened rag/cloth and scrub in a circular motion.
  3. After cleaning entire surface, wipe with a lint-free rag.
  4. Rinse thoroughly with water or solvent.

“Ceram Clean ll is the first product of many we’ve tried that immediately makes a night and day difference. The ink density can be quickly restored on the anilox rolls with very minimal effort. Before, we were not certain if the anilox engraving was worn or just plugged. With Ceram Clean ll we can now find out immediately. Hence, this product adds to the profits. Nothing compares to the Ceram Clean ll !”

Ready to get started? Contact the Harper team first and we’ll assist you every step of the way.

Request a Quote or Consultation