Charlotte, North Carolina, August 30, 2018—HarperScientific, a division of global anilox roll supplier Harper Corporation of America, has expanded its available cleaners to include Harper Performance Wash™. This fast-acting, low foam anilox roll cleaner is highly alkaline based and effective at removing water-based, UV, and solvent inks.

The Performance Wash excels at penetrating through several layers of ink and is ready to use at room temperature or can be heated up to 100°F. It is a concentrated solution that can be diluted with tap water depending on the cleaning method used, type of ink, and condition of the roll. The Performance Wash is versatile and can be used in automatic roll cleaning machines with rinse cycles or ultrasonic tanks.

Before using this product, Harper Corporation of America recommends that any existing cleaners are completely flushed from the system, liquid filters are changed, and holding tanks are drained and wiped clean to prevent potential chemical reactions. Proper safety precautions including use of personal protective equipment should be followed. Any exposed aluminum should also be covered with an approved processing adapter and chips should be filled to prevent damage. The Performance Wash is not suitable for soft metals.

Harper Corporation of America is excited to make cleaning easier and more effective by introducing Harper Performance Wash anilox roll cleaner to its line of available products.

For more information, please contact Jazmin Siancas at 704-588-3371, ext. 4292, or jsiancas@harperimage.com.     

Charlotte, North Carolina, August 13, 2012—The annual Roadshow, hosted by global anilox roll supplier Harper Corporation of America, is holding a complimentary event in Clemson, South Carolina, on Thursday, August 23, 2012. Harper Corporation is encouraging flexographic professionals to register for this event as soon as possible, as space in the free seminar is filling quickly.

The Roadshow features a variety of presentations and demonstrations presented by industry leaders. This particular stop on the tour welcomes the expertise of Paul Teachout, from Harper Corporation of America, Mike Potter, from Flexo Wash, Ron Zessack, from Siegwerk, Jamie Eggleston, from 3M, Josh Kiser, from Harper Corporation of America, Kris Harris, from Flxon, and Rory Marsoun, from ESKO.

The topics upon which these presentations will focus include relevant issues that will appeal to today’s flexographic professionals. Some of the subjects to be covered include prepress operations, doctor blades, ink proofing, tape selection, fast match-color, cleaning solutions, and quantification of the flexographic process.

In addition to these presentations, attendees will be treated to a tour of the Clemson University campus, a complimentary lunch, and door prizes.

The Clemson stop of the Harper Roadshow will be held at The Madren Conference Center at 230 Madren Center Drive, Clemson, SC 29634 and is open to all flexographic professionals, including print managers and supervisors, prepress managers, graphic designers, suppliers, operators, and purchasing and general managers.

Harper Corporation of America is proud to present the annual Roadshow and encourages interested individuals to register as soon as possible, as space is limited.

For more information, please contact Jazmin Kluttz at 704-588-3371, ext. 4292, or jkluttz@harperimage.com.

Charlotte, North Carolina, April 18, 2012— Global anilox roll supplier Harper Corporation sadly announces the passing of Ronald “Ron” Lee Harper, who died on April 14, 2012. The co-founder of Harper Corporation, Ron and his wife, Katherine, launched the business in 1971.

Since forming Harper Corporation of America, Ron and Katherine have dedicated their time and energy to the flexographic industry, about which Ron was exceedingly passionate. His hard work resulted in the international expansion of Harper’s brand. Today, the company that Ron helped develop is a global leader in the flexographic field. Through his work, Ron revolutionized printing quality by utilizing advanced technology.

In addition to running Harper Corporation of America, Ron wrote several books, including The Harder I Work, The Luckier I Get, which contains his business philosophies and achievements. The Harpers have also supported the efforts of many colleges, including those in the Carolinas, Chicago, California, and Wisconsin, which have created departments and buildings that bear their name in honor of their patronage. Additionally, the generosity of Ron and Katherine has resulted in the Ron and Katherine Harper Scholarship Fund and The Harper National Flexographic Center at CPCC. Appalachian State University opened the Katherine Harper Hall in 2007 as a token of thanks for the Harpers’ support.

Ron and Katherine donated a generous amount to Clemson University in an effort to assist with the development of its graphics department. Likewise, they spearheaded the raising of one million dollars in 1999, which was donated to improve flexographic education in high school programs. To get the drive started, the Harpers personally contributed the first $100,000. Over the years, the Harpers assisted in the creation of flexographic printing programs in 21 high schools and 32 colleges across the United States, Canada, Argentina, and Costa Rica.

In 2008, Ron and Katherine moved to Stanley, North Carolina. Their commitment to supporting education, and their community, remained strong. Ron was greatly impressed by Smart Board technology and donated funds to help Gaston County’s classrooms receive these devices, matching the donations of others. Furthermore, the couple contributed to the purchase of the Stanley town clock, upgrades to the Brevard Station Museum, and a Smart Board for use by museum patrons. Ron also spearheaded efforts to build Harper Park. He knew this park was not the largest in the state of North Carolina, but he knew it would be the best.

In recognition of their community involvement, the Harpers were awarded the 2010 Spirit of Freedom Award and the Order of the Long Leaf Pine State, which was appointed by Governor Perdue. When handling both business and personal affairs, Ron abided by a philosophy that valued others. He knew that making decisions with the best interest of his customers, employees, and community in mind would lead to success. As such, he measured his success by the amount of good he did in the world. Having a positive influence on the lives of others was his ultimate goal. Today, thousands of people attest that Ron Harper achieved this goal.

Ron Harper has touched many lives. He lived by a strong desire to make a positive difference in the world. Harper Corporation of America is a lasting legacy that Ron Harper built to benefit the lives of others. His participation in the Foundation of Flexographic Technical Association, his election to the FFTA Hall of Fame in 1999, the Harpers’ 2007 designation as “Manufacturing Champions” by the Chamber of Commerce, Ron’s 1995 appointment to the North Carolina Education Fund Board of Directors by Governor Jim Hunt, and his 1997 Governor’s Excellence in Workforce Development Award all reflect his dedication to his industry and his community.

The Harper family is being cared for by the Carothers Funeral Home in Stanley, North Carolina. To send condolences, visit http://www.carothersfuneralhomestanley.com. In lieu of flowers, memorials may be made to: Gaston Hospice, P.O. Box 3984, Gastonia, NC 28054; Harper Park, P.O. Box 279, Stanley, NC 28164; or Christ’s Evangelical Lutheran Church, Backpack Ministry, 203 S. Main Street, Stanley, NC 28164.

For more information, please contact Jazmin Kluttz at 704-588-3371, ext. 4292, or jkluttz@harperimage.com.

Charlotte, North Carolina, May 16, 2016—Global anilox roll supplier Harper Corporation of America congratulates TrishaLee Bull and Colin Schleicher, students of Waukesha County Technical School inPewaukee, WI, for being the 2016 Phoenix Challenge High School Competition first place champions. This is the second year in a row that WCTC has won first place. Harper was a purple sponsor for the 19^thAnnual Phoenix Challenge High School Skills Competition held on April 8 at the CCPP Harper Campus in Charlotte, NC, and has been an active supporter every year since the competition’s inception.

The Phoenix Challenge Foundation (PCF) encourages flexographic education to expose students to the flexographic industry as potential careers and gives leaders in the field the opportunity to support their advancement. The PCF conducts two yearly flexographic-related competitions: one for colleges and universities, and the other for high schools and vocational schools in the United States and Canada. The HS competition is a team-based skills competition that tests both knowledge and hands-on abilities across five areas. Each team takes the FTA level 1 operators certification and a printing mathematics test followed by exhibiting skills in prepress, plate making, and a 90-minute two-color die cut press run.

Nearly 60 students and educators traveled to Charlotte for the competition. Their skills were judged by a panel of industry professionals and educators including Lee Kluttz, Harper President, and Mark Jacques, Vice President of Manufacturing at Harper. Tony Donato, Product Development Engineer at Harper and Board Member for the Phoenix Challenge Foundation, presented the Diann Teague Award to Waukesha’s Flexo instructor Dina Vees for the excellent training of her winning students.

Travel, accommodations, materials, scholarships, and more were all funded by the Phoenix Challenge Foundation through sponsorships from companies like Harper. Harper is proud to support the future of the flexographic industry and enable students to pursue these types of careers.

For more information, please contact Jazmin Siancas at 704-588-3371, ext. 4292, or jsiancas@harperimage.com.

Charlotte, North Carolina, July 18, 2012—Alan Rogers and Juan Bermudez, valued employees at global anilox roll supplier Harper Corporation of America, have been recognized for their professional performance with promotions. As of June 18, 2012, Alan Rogers is the Vice President of Sales for the United States and Canada and Juan Bermudez is the Vice President of Sales for Latin America.

In his new position, Rogers will oversee all Harper sale activity within the United States and Canada. Additionally, he will supervise the Customer Service team and head up corporate relations.

Rogers joined the Harper family on May 24, 2004 as a Technical Account Manager. He holds a Bachelor of Science in Industrial Management from Georgia Tech and has worked as a member of management at various organizations since 1987.

Bermudez, in taking on the role of Vice President of Sales for Latin America, will oversee the efforts of agents, sales, and growth within his territory. As such, he will head up the Latin America sales team.

On October 6, 1997, Bermudez joined the Harper family as a Regional Sales Manager for Latin America. Bermudez holds a Bachelor of International Studies and a Master of Business Administration in Management and Marketing. Additionally, he has earned FIRST certification as an Implementation Specialist, which allows him to bring a great deal of knowledge and insight into the flexographic industry.

Harper Corporation of America is looking forward to the accomplishments both Rogers and Bermudez will achieve in their new roles and congratulates them on their success.

For more information, please contact Jazmin Kluttz at 704-588-3371, ext. 4292, or jkluttz@harperimage.com.